![]() I repeated taking some pictures, it mounted fine and the picture files were all there. Took it to the Windows 7 box, quick formatted it, and returned to Ubuntu where mounted fine. Being careful to turn the camera off, I removed the card and tried to mount it in Ubuntu. I then un-mounted the card, returned it to the camera, and formatted it in the camera. ![]() It mounted fine and all the pictures were accessible. I ejected the card, placed it in the camera, took several pictures, and returned it to the Ubuntu 14.04 card reader. I then did a Windows 7 "quick format", ejected the card, and then inserted it in the built-in card reader of my Ubuntu 14.04 box (HP Pavillion p6720f) that had previously refused to mount it. ![]() I then used a sector editor to see if the FAT32 "dirty bit" was set. I ran CHKDSK in Win7, no problems reported. The card worked fine in my Panasonic DMD-GX1 camera, and mounted fine in Windows 7 with no errors. I have run into the same problem, first thinking there must be a "dirty bit" set on the FAT32 formatted SD card after I had removed it without first unmounting it. blkid also runs forever with SD Card inserted When I run GParted with SD card inside, it will never scan all drives, but it will when I remove it. Update: I tried the same SD card with my other laptop also running Ubuntu 14.04 and it works with no problem. Is it a Ubuntu bug, or could it be a SD Card issue? So obviously, I can see my SD card here, but it seems strange to me that disk identifier is 0x00000000, and that it took about 2 minutes to get this information. I/O size (minimum/optimal): 512 bytes / 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition 1 does not start on physical sector boundary. I/O size (minimum/optimal): 4096 bytes / 4096 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Then I tried doing sudo fdisk -l and the output was: Disk /dev/sda: 750.2 GB, 750156374016 bytesĢ55 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors I tried inserting 4GB Transcend SD Card into Card Reader, but nothing happens.Īs I was directed to Why does Ubuntu not detect my SD card? this question, I tried doing what it said, but nothing changed.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |